RSF Opel 3 Plus
$5,299.00
Behind the elegantly shaped door of the Opel 3 burns a fire that reflects the traditions of our ancestors. Yet this is no ordinary fire. This fire yields low emissions, overnight burns, and efficiency on par with most basement furnaces. The patented technologies used in the Opel 3 Plus give you the peace of mind that your fireplace burns a renewable energy source in a beautiful and environmentally responsible way.
SKU
FF-OPP3C
| BTU/Hr Input | Up to 70,000 BTU/Hr |
|---|---|
| Heating Capacity | Up to 3,000 sq. ft. |
| Efficiency | 80% (LHV), 70% (HHV) |
| Emissions | 0.7 g/hr Catalytic |
| Burn Time | 8+ Hours |
| Log Length | 18" Maximum |
| Firebox Size | 3.6 cu. ft. |
| Firebox Construction | Refractory Lined Steel |
| Clean Burn Technology | Catalytic or Non-Cat |
| Fan/Blower | Optional |
| Zone Capability | Up to Two Gravity Vent Kits |
| Chimney Type | 7" ICC Chimney or Masonry |
| Outside Air Vent | 4" |
| Mantel Clearance | 52" from base (4" deep mantel) to 65" from base (max 12" deep mantel) |
| Hearth Requirement | 36" W x 16" D Non-Combustible |
| Fireplace Dimensions | 52-1/4" H x 37" W x 24" D |
| Framing Dimensions | 50-1/2" H x 39" W x 24" D |
| Unit Weight | 553 lbs. |
| Unique Features | Central Heat Kit Enables Heating in Additional Rooms |
| Notes | All specifications per the Manufacturer. Heating capacity and output are to be used as a guide only and cannot be accurately compared across manufacturers. Burn times will vary based on installation, how the unit is operated, load size, etc... |
Write Your Own Review
The Opel Plus series has taken the Opel family of catalytic fireplaces to the next level. EPA certified at 0.7g/hr makes the Opel Plus one of the most advanced and cleanest units available on the market today, yet it still maintains its classic styling. In the past, Popular Science Magazine has recommended the Opel for its efficiency and reduction of emissions. Over the years this technology has only improved and been refined to make the Opel Plus what it is today.
Available Options
- Clean Face Kit (includes 2 gravity vent kits)
- Black or Classic Louvers
- Firescreen
- Circulating Blower (for use with louvers only)
- Central Heat Blower (variable speed inline blower; includes rheostat & back-draft damper)
- Thermostat Kit (wall mounted thermostat & draft damper motor to control primary air)
- Inline Fan (fan in rigid section of duct) - not for use with louvers
- Rock Retainer Kit
Brochure
